thermoelectrically cooled type easy-to-use detector modules with built-in preamps infrared detector modules with preamp www.hamamatsu.com 1 infrared detector modules operate just by connecting to dc power supplies. the detector is selectable from among inas and mct, which are all combined with a thermoelectric cooler. we welcome requests for custom devices that suit your application. infrared detection 6-conductor cable for te-cooled type (for dc power supply) a4372-07: 2 m (connector installed at one end) instruction manual high s/n compact size features applications accessories easy to use operates just by connecting to dc power supply circuit design optimized for detector characteristics built-in temperature control circuit (fixed control temperature) structure / absolute maximum ratings type no. detector photosensitive area absolute maximum ratings operating temperature storage temperature supply voltage topr tstg vcc vp * 1 (mm) (c) (c) (v) (v) C12492-210 inas (p10090-21) 1 0 to +40 -20 to +50 18 +5 c12495-211s mct (p3981) 1 1 +5 c12495-311m mct (p2750) 1 1 +7 c12495-111l mct (p3257-101) 1 1 +5 * 1: p ower supply f or te-cooled detector note: exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. always be sure to use the product within the absolute maximum ratings.
infrared detector modules with preamp thermoelectrically cooled type 2 electrical and optical characteristics (typ. ta=25 c, vcc=15 v, vp=+2.5 v * 2 , unless otherwise noted) type no. element temper- ature td peak sensitivity wavelength p cutoff wave- length photosensitivity = p noise equivalent power nep frequency response -3 db (hz) output impe- dance maximum output voltage r l =1 k supply voltage * 3 (v) current consumption (ma) (v/w) (w/hz 1/2 ) fcl fch (v) vcc, vee vp vcc= 15v vp (c) ( m) min. typ. typ. max. typ. max. min. typ. () min. typ. min. typ. max. min. typ. max. typ. max. typ. max. C12492-210 -28 3.25 3.45 0.8 10 7 1.0 10 7 4.0 10 -12 1.0 10 -11 510 80 k 100 k 50 12 13 14.5 15 15.5 2.4 2.5 3.5 +60,-20 +80,-30 600 1100 c12495-211s -25 3.6 4.3 1.3 10 7 2.0 10 7 2.0 10 -12 1.0 10 -11 5107 k 15 k 50 12 13 14.5 15 15.5 2.4 2.5 3.5 +60,-16 +80,-25 600 1100 c12495-311m -58 4.8 5.5 0.8 10 7 1.0 10 7 5.0 10 -12 3.0 10 -11 510 20 k 35 k 50 12 13 14.5 15 15.5 4.25 4.5 4.75 +60,-16 +80,-25 600 1100 c12495-111l -3 6.5 11.5 1.3 2 2.0 10 -7 1.2 10 -6 0- 350 k 500 k 50 12 13 14.5 15 15.5 2.4 2.5 3.5 +1 3 0 , -2 0 +15 0 , -3 0 800 1400 * 2: vp=+2.5 v (C12492-210, c12495-211s), +4.5 v (c12495-311m) * 3: vcc=15 v, vp 1 =2.5 v or vp 2 =4.5 v recommended dc power supply (analog power supply): e3630a (agilent technologies) current capacity: more than 1.5 times the maximum current consumption ripple noise: 5 mvp-p or less (15 v power supply) 5 mvp-p or less (+2.5 v, +4.5 v power supply) spectral response wavelength (m) (typ.) 10 8 10 7 10 6 10 5 10 10 10 12 10 11 10 9 d* (cm hz 1/2 /w) 234 1 567891011 12 C12492-210 (td=-28 c) c12495-211s (td=-25 c) c12495-311m (td=-58 c) c12495-111l (td=-3 c) kirdb0551ea
infrared detector modules with preamp thermoelectrically cooled type 3 dimensional outlines (unit: mm) note: the cooling fin (front side) is removable. the cooling performance is not guaranteed if removed. note: the cooling fin (front side) is removable. the cooling performance is not guaranteed if removed. kirda00232ea C12492-210/c12495-211s 50 2 26.5 12 (4 ) m3 depth 5 (threaded hole) bnc connector (signal output) 6-pin connector (voltage input) 0.8 46 0.3 20 0.3 75.2 3.3 0.2 45 40 20 26 0.3 26 0.3 tolerance unless otherwise noted: 1 (4) 3.2 depth 14.5 + m3 depth 5 (for m3 countersunk screw) cooling fin (front side) photosensitive surface photosensitive area 45 45 (4 ) m3 depth 5 (threaded hole) bnc connector (signal output) 6-pin connector (voltage input) 34 0.3 31 0.3 77 20 3 8 66.5 0.2 4.6 0.5 (photosensitive surface) 50 116.5 12 26.5 46 0.3 20 0.3 tolerance unless otherwise noted: 1 cooling fin (front side) (4) 3.2 depth 24.5 + m3 depth 5 (for m3 countersunk screw) photosensitive area photosensitive surface kirda0233ea c12495-311m
infrared detector modules with preamp thermoelectrically cooled type 4 note: the cooling fin (front side) is removable. the cooling performance is not guaranteed if removed. note: remove the braid from the shield cable and keep the wires together. kirda00235ea c12495-111l 92 4.85 0.2 40 45 26 0.3 20 tolerance unless otherwise noted: 1 (4) 3.2 ! depth ! 14.5 + m3 depth 5 (for m3 countersunk screw) 26 0.3 92 2 26.5 12 (4 ) m3 depth 5 (threaded hole) bnc connector (signal output) 6-pin connector (voltage input) offset voltage adjustment screw 0.7 0.4 62.8 0.3 27.2 20 0.3 20 0.3 photosensitive area photosensitive surface cooling fin (front side) cable (for dc power supply) a4372-07 kirda0241ea 1900 10 90 10 36 10 2 solder processing 4.8 12.3 connector: lf07wbp-6p (made by hirose electric) plug (looking into the plug) note: with shield wire pin connection pin no. +2.5 v or +4.5 v power supply for cooling controller gnd power supply for cooling controller output for temperature monitor +15 v -15 v gnd lead color red blue light green yellow white black tolerance unless otherwise noted: 1
cat. no. kird1122e01 feb. 2014 dn www.hamamatsu.com hamamatsu photonics k.k., solid state division 1126-1 ichino-cho, higashi-ku, hamamatsu city, 435-8558 japan, telephone: (81) 53-434-3311, fax: (81) 53-434-5184 u.s.a.: hamamatsu corporation: 360 foothill road, p.o.box 6910, bridgewater, n.j. 08807-0910, u.s.a., telephone: (1) 908-231-0960, fax: (1) 908-231-1218 germany: hamamatsu photonics deutschland gmbh: arzbergerstr. 10, d-82211 herrsching am ammersee, germany, telephone: (49) 8152-375-0, fax: (49) 8152-265-8 france: hamamatsu photonics france s.a.r.l.: 19, rue du saule trapu, parc du moulin de massy, 91882 massy cedex, france, telephone: 33-(1) 69 53 71 00, fax: 33-(1) 69 53 71 10 united kingdom: hamamatsu photonics uk limited: 2 howard court, 10 tewin road, welwyn garden city, hertfordshire al7 1bw, united kingdom, telephone: (44) 1707-294888, fax: (44) 1707-325777 north europe: hamamatsu photonics norden ab: thorshamnsgatan 35 16440 kista, sweden, telephone: (46) 8-509-031-00, fax: (46) 8- 509-031-01 italy: hamamatsu photonics italia s.r.l.: strada della moia, 1 int. 6, 20020 arese, (milano), italy, telephone: (39) 02-935-81-733, fax: (39) 02-935-81-741 china: hamamatsu photonics (china) co., ltd.: 1201 tower b, jiaming center, no.27 dongsanhuan beilu, chaoyang district, beijing 100020, china, telephone: (86) 10-6586-6006, fax: (86) 10-6586-2866 product specifications are subject to change without prior notice due to improvements or other reasons. this document has been carefully prepared and the information contained is believed to be accurate. in rare cases, however, there may be inaccuracies such as text errors. before using these products, always contact us for the delivery specification sheet to check the latest specifications. t ype numbers of products listed in the delivery specification sheets or supplied as samples may have a suffix "(x)" which means preliminary specifications or a suffix "(z)" which means developmental specifications. t he product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that one year period. however, even if within the warranty period we accept absolutely no liability for any loss caused by natural d isasters or improper product use. copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission. information described in this material is current as of february, 2014. infrared detector modules with preamp thermoelectrically cooled type 5 precautions this detector will not operate without cooling. always supply +2.5 v or +4.5 v to cool the detector element. always use a dual-polarity (15 v) power supply to operate this detector. never use a single-polarity (+15 v or -15 v only) pow er supply. using a single-polarity power supply may cause the ampli er in the detector module to break down. be careful not to apply excessive force to the detector element surface. applying excessive force may damage the light input wi ndow. do not directly touch the light input window with bare hands. if dust or dirt gets on the window, wipe it gently using ethyl alcohol. do not drop this product or do not apply excessive shock to it. related information ? notice technical information ? infrared detectors / technical information precautions http://www.hamamatsu.com/sp/ssd/doc_en.html
|
